Block Paving Matt Sealer Bundle (3 Sizes)
The perfect combination of equipment and products to get everything you're likely to need to transform your driveway or patio that will facilitate a complete transformation of your driveway or patio
Our NEW Smartseal Block Paving DIY Bundle is the perfect combination of equipment and products that will facilitate a complete transformation of your driveway or patio. The Smartseal Xtreme Drive Cleaner contains four powerful active ingredients which were formulated to inhibit further growth and exponential spread of green and organic growths, as well as the killing and removal of black spot lichens, moss and algae.
Smartseal Block Paving Sealer in a Matt Finish will then look to provide effective protection against a plethora of surface contamination, such as oil spills, food staining and more. Once applied and dried, it's long-lasting and durable, as it hardens the freshly laid sand to solidify the inside of the joint, which will then act as a 'barrier' preventing weeds from growing from in between. Both products are best applied with the roller included, for complete ease of application.
Application Guidelines:
- Ensure paving is pressure washed to remove all surface debris and 'muck' from joints.
- Leave paving to dry for 3-4 clear & dry days.
- Once dry, before sealing. Push Kiln Dried Sand in between all joints on Paving.
- Apply 2 coats of Block Paving Sealer with either Roller or Sprayer (allow 2-3 hours between coats)
- Allow 24 hours for sealer to completely cure.
For more information on the Block Paving Sealer application; please visit the Smartseal YouTube playlists
After correctly applying the sealer, expect to have between 3-5 years protection*. Sealer longevity will vary dependent on a number of factors such as: traffic (foot/vehicle), weather and general maintenance.
Product Benefits:
- Remove tough dirt and grime
- Protect against loss of colour
- Inhibit green and organic growth
- Impart oil and stain resistance
Package contents:
Bundle 1 to cover 30 m²
1 x Block Paving Sealer - Matt Finish - 25 Litre
1 x Drive Clean Xtreme - 5 Litre
1 x Professional Roller Kit
1 x Safety Wear Kit
Bundle 2 to cover 60 m²
2 x Block Paving Sealer - Matt Finish - 25 Litre
2 x Drive Clean Xtreme - 5 Litre
1 x Professional Roller Kit
1 x Safety Wear Kit
Bundle 3 to cover 90 m²
3 x Block Paving Sealer - Matt Finish - 25 Litre
3 x Drive Clean Xtreme - 5 Litre
1 x Professional Roller Kit
1 x Safety Wear Kit
Technical & Test Data
Smartseal Block Paving sealer has been tested by the TRL (Transport Research Laboratory) and certified that it meets the SRV (Skid Resistance Value) for all categories of paving for local authority pedestrian areas and when heavily trafficked is suitable for special applications where risks of skidding are high as laid down in the UK Highway Authorities Tender Specification. Copies are available on request.
Specification Clause
Newly laid block or flagstone paving shall be treated with Smartseal block paving sealer to protect and stabilise jointing sand and enhance surface colour and increase abrasion resistance. All materials should comply with ISO9002 for Quality Assurance. All work should be carried out in conjunction with the manufacturers current technical data sheet and instructions for use.
Health & Safety
Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator when applying. Store in a cool place. Flash point 40°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information. Contains Xylene.
Q: Can this be used on concrete patio slabs too?
A: The block paving in matt sealer can be used on concrete patio slabs. However, most people would use the patio sealer for this purpose.
Q: When the description says enough product (eg sealer) to do 30m sq, how many coats is this allowing for? My drive is approx 45m sq and I'm trying to figure out how many litres of Matt sealer to purchase.
A: For the Block Paving Sealer Matt the coverage is on average 2 m2 per litre for the first coat and 3.5 m2 per litre for the second. This means on average a 25L drum of Block Paving Sealer will do 2 coats of 30m2. For 45m2 you will need on average: 22.5L - First Coat 13L - Second Coat Total: 35.5L
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over £75 are subject to the delivery address location.