Concrete ColourSeal - BLACK

Smartseal Concrete ColourSeal is an formulated blend of highly concentrated pigments and hard-wearing acrylic resins, that will transform and protect external concrete surfaces. Superior to an outdoor concrete paint inn black it provides lasting protection to driveways and patios.

Concrete ColourSeal is the perfect way to enhance the appearance of concrete bays, paths, bases and parking areas (not to be used on imprinted concrete or previously sealed or painted concrete).

Suitable for Power floated and Screeded concrete surfaces.

Application is simple and easy by roller or brush, with two coats recommended for long term protection. 

Concrete ColourSeal's unique formula is UV light and stain resistant. The sealer will soak deep into the porous voids of the concrete, acting as a highly effective dust proofer and concrete hardener. It can be applied on smooth or textured surfaces (coverage rates may be reduced on tamped or rough concrete). Can be used as a more durable alternative to a concrete driveway paint or a black concrete patio paint.

• Transforms Plain Concrete

• Suitable for Concrete Bays, Paths, Bases and Parking Areas

• Recolours and Protects

• UV Stable

• Colour Fast

• Stain Resistant

• Average Coverage: 4 - 5m²/litre first coat & 6 - 8m²/litre second coat

• Ready to apply straight from the tin

• NOT for use on imprinted concrete or previously painted/sealed concrete

Concrete ColourSeal is superior to an outdoor concrete paint. Although many people search for an black exterior concrete paint, we are confident that our product will look better and last longer.

PLEASE NOTE: Concrete Colourseal is only for use on untreated or unsealed concrete surfaces.

*Always apply to a test area first and leave for 5-7 days to determine suitability.

PREPARATION: 
Fully clean the surface of the concrete using a power washer and drive clean xtreme or patio clean xtreme. Allow to completely dry for a minimum of 72 hours. Apply in temperatures between 12-23 degrees centigrade. Allow 2 hours drying time between coats. Only apply in dry conditions with no rain forecast within 6 hours after application.

APPLICATION: 
It is important to thoroughly mix before and during use, ideally with a plasterers paddle. Apply 2 coats by brush or roller (3 coats may be required on older paved surfaces). Add the anti-slip additive if required to improve the slip resistance of the surface. The surface should be fully dry after 24 hours.

COVERAGE: 
Average coverage is approx. 4sqm per litre on the 1st coat and 6-8sqm on the 2nd coat.

We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.

If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.

Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.

If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.

We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.

Our product returns policy can be viewed by visiting our Terms and Conditions section.

*Free delivery on orders over £75 are subject to the delivery address location.